Conference Program

March 19 | AM Tours & Pre-Networking Event

March 20-21 | Conference, expo & B2B matchmaking

“Accelerating the adoption of AM”

Staged under this motto, the 2-day conference program is shaped along these focus topics:

Day 1

Wednesday, March 20, 2024 | Subject to change.

MAIN STAGE if no other location is specified

  • 08.00 - 09.00

    Check-in, morning coffee | Early bird networking in the exhibition

    Estrel Congress Center, Sonnenallee 225, 12057 Berlin
    Estrel Congress Center, Sonnenallee 225, 12057 Berlin
  • 09.00 - 09.25Opening Session

    Opening and networking kick-off

    Daniel Wäldchen
    Member of the Executive Board, IPM AG
    Daniel Wäldchen
    Member of the Executive Board, IPM AG
    Intro: Global 3d printing market figures
    Matthias Schmidt-Lehr
    Managing Partner, Ampower GmbH & Co. KG
    Intro: Global 3d printing market figures
    Matthias Schmidt-Lehr
    Managing Partner, Ampower GmbH & Co. KG
  • 09.25 - 10.15Panel discussion | Navigating the next frontier

    The global battle for 3D printing dominance

    Panel Impulse: William B. Czajkowski
    Minister-Counselor for Commercial Affairs, U.S. Department of Commerce, U.S. Commercial Service, Embassy of the United States of America
    Panel Impulse: William B. Czajkowski
    Minister-Counselor for Commercial Affairs, U.S. Department of Commerce, U.S. Commercial Service, Embassy of the United States of America
    Moderation: Prof. Dr. Christian Seidel
    Professor & Head of Smart Manufacturing Lab, Munich University
    Moderation: Prof. Dr. Christian Seidel
    Professor & Head of Smart Manufacturing Lab, Munich University
    Jason Gorey
    Executive Director, ASTRO America [AM Forward Initiative]
    Jason Gorey
    Executive Director, ASTRO America [AM Forward Initiative]
    Mehdi Hocine
    Head of Unit 'Machinery & Equipment', European Commission
    Mehdi Hocine
    Head of Unit 'Machinery & Equipment', European Commission
    Marie Langer
    CEO, EOS GmbH
    Marie Langer
    CEO, EOS GmbH
    Werner Loscheider
    Head of Division IVB4 - Construction industry, lightweight construction, new materials, resource efficiency, Federal Ministry of Economic Affairs and Climate Action
    Werner Loscheider
    Head of Division IVB4 - Construction industry, lightweight construction, new materials, resource efficiency, Federal Ministry of Economic Affairs and Climate Action
    Martin Back
    CEO, BASF Forward AM
    Martin Back
    CEO, BASF Forward AM
  • 10.15 - 10.35Keynote | Industrial Application & Automation

    How Michelin mastered the serial production of 3D printed molds

    Olivier Brunagel
    R&D Mold Manager, Michelin
    Olivier Brunagel
    R&D Mold Manager, Michelin
    Guillaume Seychal
    Mold Engineer , Michelin
    Guillaume Seychal
    Mold Engineer , Michelin
    Julien Marcilly
    CEO, AddUp
    Julien Marcilly
    CEO, AddUp
  • 10.35 - 11.20

    Coffee break | Networking in the exhibition

    Basketball Challenge supported by EOS
    Basketball Challenge supported by EOS
  • 11.20 - 11.40Keynote | Advanced Materials

    New materials and approaches for 3D and 4D printing

    Prof. Shlomo Magdassi
    Chair, Institute of Chemistry, The Hebrew University of Jerusalem
    Prof. Shlomo Magdassi
    Chair, Institute of Chemistry, The Hebrew University of Jerusalem
  • 11.40 - 12.00Keynote | Industrial Application & Automation

    Automated manufacturing with polymer 3d printing @Sauber Motorsports

    Marco Gehrig
    Head of Mechanical & AM Production, Sauber Motorsports
    Marco Gehrig
    Head of Mechanical & AM Production, Sauber Motorsports
    Dr. Tina Schlingmann
    Regional Director EMEA, EOS GmbH
    Dr. Tina Schlingmann
    Regional Director EMEA, EOS GmbH
  • 12.00 - 12.20Keynote | Industrial Application & Automation

    Current and future application areas of additive manufacturing at Audi

    Dr. Erhard Brandl
    Head of 3D-Printing-Centre, Audi AG
    Dr. Erhard Brandl
    Head of 3D-Printing-Centre, Audi AG
  • 12.20 - 12.40Keynote | Industrial Application & Automation

    Opportunities and challenges in the adoption of Additive Manufacturing in industrial production

    Oliver Hofmann
    CEO, Robert Hofmann GmbH
    Oliver Hofmann
    CEO, Robert Hofmann GmbH
    Dennis Bieber
    Solution Engineer, Materialise
    Dennis Bieber
    Solution Engineer, Materialise
  • 12.00 - 14.00Room Paris | Inspiring Pitches, Networking & Lunch

    Women in AM luncheon | See here for the details - join us!

    Impulse 1
    Marie Langer
    CEO, EOS GmbH
    Impulse 1
    Marie Langer
    CEO, EOS GmbH
    Stefanie Brickwede
    Managing Director, Mobility goes Additive e.V.
    Stefanie Brickwede
    Managing Director, Mobility goes Additive e.V.
    Impulse 2
    Naomi Nathan
    Head of Medical, Mobility goes Additive e.V.
    Impulse 2
    Naomi Nathan
    Head of Medical, Mobility goes Additive e.V.
  • 12.40 - 13.50

    Lunch break | Networking in the exhibition

    Basketball Challenge supported by EOS
    Basketball Challenge supported by EOS
  • 13.00 - 13.40Innovation Stage [parallel session]

    Tech Pitches

    See here for all speeches!
    10min presentations from our exhibitors on innovative new materials, technologies, solutions and business cases

  • 13.50 - 14.10Keynote | Additive Design & Software

    Leveraging AM design to gain production efficiency

    Job van de Sande
    Head of Engineering, ERIKS
    Job van de Sande
    Head of Engineering, ERIKS
    Dr. Ole von Seelen
    Head of Business Development, trinckle 3D GmbH
    Dr. Ole von Seelen
    Head of Business Development, trinckle 3D GmbH
  • 13.50 - 14.30Innovation Stage [parallel session] | Industrial Application

    User Session

    Moderation: Stefan Ritt
    Lecturer, Technical University of Luebeck & AMUG Dino
    Moderation: Stefan Ritt
    Lecturer, Technical University of Luebeck & AMUG Dino
    13.50 - 14.00
    AM for primary aerostructure - 1st DED parts qualified for Airbus, enabling a new horizon
    Dr. Jan Hoennige
    Head of Industrialisation DED, Airbus - Premium Aerotec
    13.50 - 14.00
    AM for primary aerostructure - 1st DED parts qualified for Airbus, enabling a new horizon
    Dr. Jan Hoennige
    Head of Industrialisation DED, Airbus - Premium Aerotec
    14.00 - 14.10
    WAAM (Wire Arc Additive Manufacturing) and the path to series production – 1001 turbine blades for steam turbines
    René Liers
    Project Manager WAAM Lab Goerlitz | Technology Field Lead DED, Siemens Energy Global GmbH & Co. KG
    14.00 - 14.10
    WAAM (Wire Arc Additive Manufacturing) and the path to series production – 1001 turbine blades for steam turbines
    René Liers
    Project Manager WAAM Lab Goerlitz | Technology Field Lead DED, Siemens Energy Global GmbH & Co. KG
    Sebastian Recke
    Senior Key Account Manager, GEFERTEC GmbH
    Sebastian Recke
    Senior Key Account Manager, GEFERTEC GmbH
    14.10 - 14.20
    Breaking boundaries: From concept to reality
    Alex Ivkovic
    Category Buyer & Logistic Manager, Daimler Truck AG - Daimler Buses GmbH
    14.10 - 14.20
    Breaking boundaries: From concept to reality
    Alex Ivkovic
    Category Buyer & Logistic Manager, Daimler Truck AG - Daimler Buses GmbH
    Daniela Rehm
    Product and Marketing Manager, Daimler Truck AG - Daimler Buses GmbH
    Daniela Rehm
    Product and Marketing Manager, Daimler Truck AG - Daimler Buses GmbH
    14.20 - 14.30
    Innovation for mobility and beyond
    Dr. Stefan Landkammer
    Senior Key Expert Additive Manufacturing, Siemens Mobility GmbH
    14.20 - 14.30
    Innovation for mobility and beyond
    Dr. Stefan Landkammer
    Senior Key Expert Additive Manufacturing, Siemens Mobility GmbH
  • 14.10 - 15.00Masterclass | Additive Design & Software

    Boosting AM with Big Data, Physics-Based Software, Circularity, and Platformization

    Moderation: Dr. Stephan Beyer
    Co-Founder, nFrontier GmbH
    Moderation: Dr. Stephan Beyer
    Co-Founder, nFrontier GmbH
    [1] How platformization will disrupt the Additive Manufacturing landscape
    Alexander Oster
    Director Additive Manufacturing, Autodesk
    [1] How platformization will disrupt the Additive Manufacturing landscape
    Alexander Oster
    Director Additive Manufacturing, Autodesk
    [2] Unlocking the power of digital manufacturing with physics-based software tools
    David Hartmann
    Founder & CEO, Helio Additive
    [2] Unlocking the power of digital manufacturing with physics-based software tools
    David Hartmann
    Founder & CEO, Helio Additive
    [3] How could circularity inspire design in AM?
    Phoebe Blackburn
    Communications Facilitation Circular Economy, Phenomenal Words
    [3] How could circularity inspire design in AM?
    Phoebe Blackburn
    Communications Facilitation Circular Economy, Phenomenal Words
    Joint discussion
    Dr. Tim Femmer
    Senior Project Manager, Roland Berger
    Dr. Tim Femmer
    Senior Project Manager, Roland Berger
  • 15.00 - 15.15

    Coffee break | Networking in the exhibition

  • 15.15 - 17.15 Room Straßburg | Working Session [parallel session]

    Workshop #1 | Mastering AM automation - Strategies for success

    Moderation: Sven Krause
    SK Consulting
    Moderation: Sven Krause
    SK Consulting
    Table 1: Data-driven production optimization in additive manufacturing
    Mathias Messmer
    Data Analytics and Business Intelligence Engineer, EOS GmbH
    Table 1: Data-driven production optimization in additive manufacturing
    Mathias Messmer
    Data Analytics and Business Intelligence Engineer, EOS GmbH
    Table 2: Decoding the levels of AM industrialization – How to use the AM I Navigator tool for your AM strategy
    Stefan Mannhardt
    Regional Sales Manager Central Europe, DyeMansion GmbH
    Table 2: Decoding the levels of AM industrialization – How to use the AM I Navigator tool for your AM strategy
    Stefan Mannhardt
    Regional Sales Manager Central Europe, DyeMansion GmbH
    Martin Back
    CEO, BASF Forward AM
    Martin Back
    CEO, BASF Forward AM
    Table 3: AM data formats for the end-to-end digital thread - enabling closed-loop intelligent manufacturing
    Dr. Matthias Brueck
    Head of Department Virtualization, Fraunhofer IAPT
    Table 3: AM data formats for the end-to-end digital thread - enabling closed-loop intelligent manufacturing
    Dr. Matthias Brueck
    Head of Department Virtualization, Fraunhofer IAPT
  • 15.15 - 17.15Room Paris | Working Session [parallel session]

    Workshop #2 | Hands-on session: Scan, Design, Simulate, Print

    Moderation: Ulf Lindhe
    Business Innovator and Additive Manufacturing Advisor, ADAXIS
    Moderation: Ulf Lindhe
    Business Innovator and Additive Manufacturing Advisor, ADAXIS
    [Stop 1] 3D scan for additive manufacturing
    Tobias Troegner
    Solution Manager | Additive Manufacturing & 3D Printing , druckerfachmann.de
    [Stop 1] 3D scan for additive manufacturing
    Tobias Troegner
    Solution Manager | Additive Manufacturing & 3D Printing , druckerfachmann.de
    [Stop 2] Design dive: Model your 3d fixture in less than 30 min!
    Dr. Ole von Seelen
    Head of Business Development, trinckle 3D GmbH
    [Stop 2] Design dive: Model your 3d fixture in less than 30 min!
    Dr. Ole von Seelen
    Head of Business Development, trinckle 3D GmbH
    Dr. Damien Buchbinder
    Product Management, trinckle 3D GmbH
    Dr. Damien Buchbinder
    Product Management, trinckle 3D GmbH
    [Stop 3] Simulate: Model and simulate your AM process to print first time right!
    Mathieu Pérennou
    Director Global Strategy & Business Development Additive Manufacturing, Hexagon Manufacturing Intelligence
    [Stop 3] Simulate: Model and simulate your AM process to print first time right!
    Mathieu Pérennou
    Director Global Strategy & Business Development Additive Manufacturing, Hexagon Manufacturing Intelligence
    Ralph Bernhardt
    Senior Consultant Smart Manufacturing, Hexagon Manufacturing Intelligence
    Ralph Bernhardt
    Senior Consultant Smart Manufacturing, Hexagon Manufacturing Intelligence
    [Stop 4] Print: A customized 3D printed part in just a few minutes
    Robin Köstlmeier
    Product Manager , Rapid Shape GmbH
    [Stop 4] Print: A customized 3D printed part in just a few minutes
    Robin Köstlmeier
    Product Manager , Rapid Shape GmbH
  • 15.15 - 17.15Innovation Stage [parallel session]
    <

    Tech Pitches

    See here for all speeches!
    10min presentations from our exhibitors on innovative new materials, technologies, solutions and business cases

  • 17.15 - 17.40

    Coffee break | Networking in the exhibition

  • 17.40 - 18.10Presentations | Navigating the next frontier

    Start-up pitches: The next wave of innovative technologies

    Caroline Albert
    CEO & Co-Founder, nebumind
    Caroline Albert
    CEO & Co-Founder, nebumind
    Christian Fischer
    Managing Director, Headmade Materials
    Christian Fischer
    Managing Director, Headmade Materials
    Dr. Jonas Galle
    CEO, Valcun
    Dr. Jonas Galle
    CEO, Valcun
    Dr. Arpita Roychoudhury
    Innovation Manager, xolo
    Dr. Arpita Roychoudhury
    Innovation Manager, xolo
    Moderation: Arno Held
    Managing Partner, AM Ventures
    Moderation: Arno Held
    Managing Partner, AM Ventures
  • 18.10 - 18.40Panel discussion | Navigating the next frontier

    Unplugged: A conversation with investors and founders

    Martin Feldmann
    Co-Founder, VulcanForms Inc.
    Martin Feldmann
    Co-Founder, VulcanForms Inc.
    Arno Held
    Managing Partner, AM Ventures
    Arno Held
    Managing Partner, AM Ventures
    Dr. Stefan Petrikovics
    CEO, SMG Holding
    Dr. Stefan Petrikovics
    CEO, SMG Holding
    Moderation: Sven Krause
    SK Consulting
    Moderation: Sven Krause
    SK Consulting
  • 18.40 - 22.00

    Evening reception in the exhibition with flying dinner, cocktails, gin, music and after work networking

    sponsored by
    sponsored by

Day 2

Thursday, March 21, 2024 | Subject to change.

MAIN STAGE if no other location is specified

  • 08.00 - 09.00

    Check-in, morning coffee | Early bird networking in the exhibition

    Estrel Congress Center, Sonnenallee 225, 12057 Berlin
    Estrel Congress Center, Sonnenallee 225, 12057 Berlin
  • 09.00 - 09.10

    Opening of day 2 and recap

    Sven Krause
    SK Consulting
    Sven Krause
    SK Consulting
  • 09.10 - 09.50Panel Discussion | Industrial Application & Automation

    Unlocking the potential of AM: Strategies for widespread adoption

    Dr. Karsten Heuser
    VP Additive Manufacturing, Siemens Digital Industries
    Dr. Karsten Heuser
    VP Additive Manufacturing, Siemens Digital Industries
    Andreas Knoechel
    Head of Program Management, OECHSLER AG
    Andreas Knoechel
    Head of Program Management, OECHSLER AG
    Dr. Alexander Starnecker
    CEO, Weisser Spulenkörper GmbH & Co. KG
    Dr. Alexander Starnecker
    CEO, Weisser Spulenkörper GmbH & Co. KG
    Thomas Weitlaner
    SVP Additive Manufacturing, MT Aerospace AG
    Thomas Weitlaner
    SVP Additive Manufacturing, MT Aerospace AG
    Moderation: Sven Krause
    SK Consulting
    Moderation: Sven Krause
    SK Consulting
  • 09.50 - 10.10Keynote | Industrial Application & Automation

    Shaping resilience: How AM is mitigating the Energy sector’s supply chain risks

    Haakon Ellekjaer
    Chief Commercial Officer, Pelagus 3D - a thyssenkrupp Wilhelmsen joint venture
    Haakon Ellekjaer
    Chief Commercial Officer, Pelagus 3D - a thyssenkrupp Wilhelmsen joint venture
    Trine Boyer
    Principal R&D Engineer, Vår Energi
    Trine Boyer
    Principal R&D Engineer, Vår Energi
  • 10.10 - 10.40Masterclass | Industrial Application & Automation

    AM in the area of public service providers

    Moderation: Stefanie Brickwede
    Managing Director, Mobility goes Additive e.V.
    Moderation: Stefanie Brickwede
    Managing Director, Mobility goes Additive e.V.
    10.10 - 10.20
    Application of AM in the railway sector
    Henri de Chassey
    Spares & Trading / Additive Manufacturing ENG Manager, Wabtec, F
    10.10 - 10.20
    Application of AM in the railway sector
    Henri de Chassey
    Spares & Trading / Additive Manufacturing ENG Manager, Wabtec, F
    10.20 - 10.30
    AM – a defense capability enabler
    Martin Huber
    Project Officer Logistics, European Defence Agency
    10.20 - 10.30
    AM – a defense capability enabler
    Martin Huber
    Project Officer Logistics, European Defence Agency
    10.30 - 10.40
    Joint discussion
  • 10.40 - 11.10

    Coffee break | Networking in the exhibition

    Basketball Challenge supported by EOS
    Basketball Challenge supported by EOS
  • 11.10 - 11.40Working Session [parallel session] | Room Strassburg

    Deep Dive #1 | How to avoid IP rights infringements and product liability in Additive Manufacturing

    Dr. Andreas Leupold
    Lawyer, Leupold Legal
    Dr. Andreas Leupold
    Lawyer, Leupold Legal
  • 11.50 - 12.20Working Session [parallel session] | Room Strassburg

    Deep Dive #2 | Design automation: How algorithm-aided design enables digitized and automated product development and shortens time-to-market

    Carsten Putz
    Group Leader Data Driven Design, Digital Additive Production DAP, RWTH Aachen
    Carsten Putz
    Group Leader Data Driven Design, Digital Additive Production DAP, RWTH Aachen
  • 12.30 - 13.00Working Session [parallel session] | Room Strassburg

    Deep Dive #3 with Live Demo | Innovative materials – PA12 ≠ PA12 and the power of open parameters

    Fabian Schuster
    3DP Application Engineer, HP 3D
    Fabian Schuster
    3DP Application Engineer, HP 3D
  • 11.10 - 11.25Keynote | Industrial Application & Automation

    3 case study insights for metal 3D printing in industrial applications

    Simon Hoeges
    Technology Director in Metal Additive Manufacturing, GKN Additive
    Simon Hoeges
    Technology Director in Metal Additive Manufacturing, GKN Additive
    Alexandre Tartas
    Global Head of Go-To-Market, 3D Metals , HP 3D Printing Solutions
    Alexandre Tartas
    Global Head of Go-To-Market, 3D Metals , HP 3D Printing Solutions
  • 11.25 - 11.40Keynote | Navigating the Next Frontier

    Near-zero emission steel AM powder: An enabler for environmental automotive ambitions

    Frederic Tholence
    Principal Engineer, Volvo Cars Corporation
    Frederic Tholence
    Principal Engineer, Volvo Cars Corporation
    Jesper Vang
    Head of Powder Technology, SSAB Special Steels
    Jesper Vang
    Head of Powder Technology, SSAB Special Steels
  • 11.40 - 12.35Masterclass | Navigating the Next Frontier

    Applied Science Masterclass: Today’s emerging R&D for tomorrow‘s industrialization

    Moderation: Prof. Dr. Ingomar Kelbassa
    Executive Director, Fraunhofer IAPT
    Moderation: Prof. Dr. Ingomar Kelbassa
    Executive Director, Fraunhofer IAPT
    Prof. Dr. Martin Leary
    Professor Design of Additive Manufacturing, RMIT University, Australia
    Prof. Dr. Martin Leary
    Professor Design of Additive Manufacturing, RMIT University, Australia
    Prof. Dr. Dongdong Gu
    Nanjing University of Aeronautics and Astronautics (NUAA)
    Prof. Dr. Dongdong Gu
    Nanjing University of Aeronautics and Astronautics (NUAA)
    Tim Biermann
    Vice Director, Chair for Laser Technology - RWTH Aachen University
    Tim Biermann
    Vice Director, Chair for Laser Technology - RWTH Aachen University
  • 12.35 - 12.50Keynote | Industrial Application & Automation

    Additive manufacturing for precision tool development

    Dr. Florian Welzel
    CEO, GFE Schmalkalden
    Dr. Florian Welzel
    CEO, GFE Schmalkalden
    Friedemann Lell
    CEO, DMG MORI Additive GmbH
    Friedemann Lell
    CEO, DMG MORI Additive GmbH
  • 12.50 - 14.00

    Lunch break | Networking in the exhibition

    Basketball Challenge supported by EOS
    Basketball Challenge supported by EOS
  • 13.10 - 13.50Innovation Stage

    Tech Pitches

    See here for all speeches!
    10min presentations from our exhibitors on innovative new materials, technologies, solutions and business cases

  • 14.00 - 14.20Keynote | Industrial Application & Automation

    Not disruption, but evolution: Application of AM at BMW

    Dr. Maximilian Binder
    AM Project Lead – Research & Development, BMW Group
    Dr. Maximilian Binder
    AM Project Lead – Research & Development, BMW Group
  • 14.20 - 15.00Masterclass | Advanced Materials

    Additive materials and applications in extreme environments

    Moderation: Denny Schueppel
    Managing Director, Composites United
    Moderation: Denny Schueppel
    Managing Director, Composites United
    Moderation: Dr. Olaf Guennewig
    Head of Business Development, diondo GmbH
    Moderation: Dr. Olaf Guennewig
    Head of Business Development, diondo GmbH
    [1] Complex shaping of CMC components via Additive Manufacturing
    Fabia Süß
    Research Asscociate, DLR Deutsches Zentrum für Luft- und Raumfahrt e.V.
    [1] Complex shaping of CMC components via Additive Manufacturing
    Fabia Süß
    Research Asscociate, DLR Deutsches Zentrum für Luft- und Raumfahrt e.V.
    [2] AM of ceramics and ceramic matrix composites
    Gotthard Nauditt
    R&D Expert 3D Printing Composites, Schunk Kohlenstofftechnik GmbH
    [2] AM of ceramics and ceramic matrix composites
    Gotthard Nauditt
    R&D Expert 3D Printing Composites, Schunk Kohlenstofftechnik GmbH
    [3] Additive Manufactured CMC for space applications
    Dr. Stephan Schmidt-Wimmer
    Head of High Temperature Materials, Ariane Group
    [3] Additive Manufactured CMC for space applications
    Dr. Stephan Schmidt-Wimmer
    Head of High Temperature Materials, Ariane Group
  • 15.00 - 15.40Panel Discussion | Navigating the Next Frontier

    AM industry outlook: What is the next really big thing?

    Daniel Princ
    Commercial Leader, EMEA, Consumer Markets, Stratasys GmbH
    Daniel Princ
    Commercial Leader, EMEA, Consumer Markets, Stratasys GmbH
    Francois Minec
    Global Head of 3D Polymers, HP Personalization and 3D Printing
    Francois Minec
    Global Head of 3D Polymers, HP Personalization and 3D Printing
    Florian Holzhoffer
    Director Industry Management, TRUMPF Laser- und Systemtechnik GmbH
    Florian Holzhoffer
    Director Industry Management, TRUMPF Laser- und Systemtechnik GmbH
    Paul Schmidt
    Head of Additive Manufacturing Research, 10xDNA Capital Partners
    Paul Schmidt
    Head of Additive Manufacturing Research, 10xDNA Capital Partners
    Moderation: Sven Krause
    SK Consulting
    Moderation: Sven Krause
    SK Consulting
  • 15:40

    Closing address

    Daniel Wäldchen
    Member of the Executive Board, IPM AG
    Daniel Wäldchen
    Member of the Executive Board, IPM AG

Innovation Stage

Wednesday, March 20, 2024 | Subject to change.

13.00 - 13.40 CET I TECH TALK Session I
10min presentations from our exhibitors on innovative new materials, technologies, solutions and business cases

  • 13.00 - 13.40Innovation Stage [parallel session]

    Tech Talks

    Moderation: Sven Krause
    SK Consulting
    Moderation: Sven Krause
    SK Consulting
    13.00 - 13.10
    Next-Gen AM: Transformative innovations reshaping Additive Manufacturing
    Dr. Chongliang Zhong
    Head of Additive Manufacturing, Fraunhofer IFAM
    13.00 - 13.10
    Next-Gen AM: Transformative innovations reshaping Additive Manufacturing
    Dr. Chongliang Zhong
    Head of Additive Manufacturing, Fraunhofer IFAM
    13.10 - 13.20
    Highest productivity with sinter based AM
    Dennis Marquardt
    Key Account Manager, MIMplus Technologies GmbH & Co. KG
    13.10 - 13.20
    Highest productivity with sinter based AM
    Dennis Marquardt
    Key Account Manager, MIMplus Technologies GmbH & Co. KG
    13.20 - 13.30
    Electron Beam Melting with NeuBeam Technology
    Mike Ford
    European Sales Manager, Wayland Additive
    13.20 - 13.30
    Wayland Additive Talk
    Mike Ford
    European Sales Manager, Wayland Additive
    13.30 - 13.40
    Variable Nozzle – fine surface vs shortest printing time
    Oliver Friz
    CEO, Q.BIG 3D
    13.30 - 13.40
    Variable Nozzle – fine surface vs shortest printing time
    Oliver Friz
    CEO, Q.BIG 3D


13.50 - 14.30 CET | USER Session

  • 13.50 - 14.30Innovation Stage [parallel session]

    User Session

    Moderation: Stefan Ritt
    Lecturer, Technical University of Luebeck & AMUG Dino
    Moderation: Stefan Ritt
    Lecturer, Technical University of Luebeck & AMUG Dino
    13.50 - 14.00
    AM for primary aerostructure - 1st DED parts qualified for Airbus, enabling a new horizon
    Dr. Jan Hoennige
    Head of Industrialisation DED, Airbus - Premium Aerotec
    13.50 - 14.00
    AM for primary aerostructure - 1st DED parts qualified for Airbus, enabling a new horizon
    Dr. Jan Hoennige
    Head of Industrialisation DED, Airbus - Premium Aerotec
    14.00 - 14.10
    WAAM (Wire Arc Additive Manufacturing) and the Path to Series Production – 1001 Turbine Blades for Steam Turbines
    René Liers
    Project Manager WAAM Lab Goerlitz | Technology Field Lead DED, Siemens Energy Global GmbH & Co. KG
    14.00 - 14.10
    WAAM (Wire Arc Additive Manufacturing) and the Path to Series Production – 1001 Turbine Blades for Steam Turbines
    René Liers
    Project Manager WAAM Lab Goerlitz | Technology Field Lead DED, Siemens Energy Global GmbH & Co. KG
    Sebastian Recke
    Senior Key Account Manager, GEFERTEC GmbH
    Sebastian Recke
    Senior Key Account Manager, GEFERTEC GmbH
    14.10 - 14.20
    Breaking Boundaries: From concept to reality
    Alex Ivkovic
    Category Buyer & Logistic Manager, Daimler Truck AG - Daimler Buses GmbH
    14.10 - 14.20
    Breaking Boundaries: From concept to reality
    Alex Ivkovic
    Category Buyer & Logistic Manager, Daimler Truck AG - Daimler Buses GmbH
    Daniela Rehm
    Product and Marketingmanager, Daimler Truck AG - Daimler Buses GmbH
    Daniela Rehm
    Product and Marketingmanager, Daimler Truck AG - Daimler Buses GmbH
    14.20 - 14.30
    Innovation for mobility and beyond
    Dr. Stefan Landkammer
    Senior Key Expert Additive Manufacturing, Siemens Mobility GmbH
    14.20 - 14.30
    Innovation for mobility and beyond
    Dr. Stefan Landkammer
    Senior Key Expert Additive Manufacturing, Siemens Mobility GmbH


15.15 - 17.15 CET | TECH TALK Session II
10min presentations from our exhibitors on innovative new materials, technologies, solutions and business cases

  • 15.15 - 17.15Innovation Stage [parallel session]

    Tech Talks

    Moderation: Stefan Ritt
    Lecturer, Technical University of Luebeck & AMUG Dino
    Moderation: Stefan Ritt
    Lecturer, Technical University of Luebeck & AMUG Dino
    15.15 - 15.25
    Polymer-based additive manufacturing at Fraunhofer IPA: The contribution of research to the industrialisation of AM
    Oliver Refle
    Head of Department Additive Manufacturing, Fraunhofer IPA
    15.15 - 15.25
    Polymer-based additive manufacturing at Fraunhofer IPA: The contribution of research to the industrialisation of AM
    Oliver Refle
    Head of Department Additive Manufacturing, Fraunhofer IPA
    15.25 - 15.35
    Navigating new frontiers in ultra-high viscosity material jetting: How multi-material printing of high-performance materials will shape the future of AM research and development
    Grace Chang
    Head of Product & Partnerships, Quantica
    15.25 - 15.35
    Navigating new frontiers in ultra-high viscosity material jetting: How multi-material printing of high-performance materials will shape the future of AM research and development
    Grace Chang
    Head of Product & Partnerships, Quantica
    Jan Janhsen
    Group Manager AM for Photopolymers, Fraunhofer IPA
    Jan Janhsen
    Group Manager AM for Photopolymers, Fraunhofer IPA
    15.35 - 15.45
    Process quality assurance on large-format machines
    Slobodan Ilic
    Sales & Marketing Director EMEA, BLT Europe GmbH
    15.35 - 15.45
    Process quality assurance on large-format machines
    Slobodan Ilic
    Sales & Marketing Director EMEA, BLT Europe GmbH
    15.45 - 15.55
    Sustainable Solution for Large-Scale Manufacturing
    Brian Matthews
    Founder, CEO & CTO, ADDiTEC
    15.45 - 15.55
    Sustainable Solution for Large-Scale Manufacturing
    Brian Matthews
    Founder, CEO & CTO, ADDiTEC
    15.55 - 16.05
    Optimizing operations: The potential of innovative post-processing strategies for cost savings and increased profitability
    Robert Will
    Technical Sales Expert, AM Solutions
    15.55 - 16.05
    Optimizing operations: The potential of innovative post-processing strategies for cost savings and increased profitability
    Robert Will
    Technical Sales Expert, AM Solutions
    16.05 - 16.15
    BREAK
    16.15 - 16.25
    100% quality with 20% of cost with the - qualified AM standard!
    Gregor Reischle
    Director, AM Entrepreneur
    16.15 - 16.25
    100% quality with 20% of cost with the - qualified AM standard!
    Gregor Reischle
    Director, AM Entrepreneur
    16.25 - 16.35
    Bringing large format additive manufacturing to the automotive sector
    Simone Barbera
    Business Development Director, Caracol
    16.25 - 16.35
    Bringing large format additive manufacturing to the automotive sector
    Simone Barbera
    Business Development Director, Caracol
    16.35 - 16.45
    New Gas Atomised Metal Alloy Powders for Additive Manufacturing (AM)
    Nikhil Dixit
    Sales Engineer EMEA, Sandvik Additive Manufacturing
    16.35 - 16.45
    New Gas Atomised Metal Alloy Powders for Additive Manufacturing (AM)
    Nikhil Dixit
    Sales Engineer EMEA, Sandvik Additive Manufacturing
    16.45 - 16.55
    The intelligent era of additive manufacturing metal powder materials
    Lei Zhang
    Global General Sales Manager, Jiangsu Vilory Advanced Materials Technology Co., Ltd.
    16.45 - 16.55
    The intelligent era of additive manufacturing metal powder materials
    Lei Zhang
    Global General Sales Manager, Jiangsu Vilory Advanced Materials Technology Co., Ltd.
    16.55 - 17.05
    Start Up | Multi-material: Combining high-performance materials with contrasting functional properties in a single build job by Multi Material Jetting (MMJ)
    Robert Johne
    Co-Founder & CTO, AMAREA Technology GmbH
    16.55 - 17.05
    Start Up | Multi-material: Combining high-performance materials with contrasting functional properties in a single build job by Multi Material Jetting (MMJ)
    Robert Johne
    Co-Founder & CTO, AMAREA Technology GmbH

Thursday, March 21, 2024 | Subject to change.

13.10 - 13.50 CET | TECH TALK Session III
10min presentations from our exhibitors on innovative new materials, technologies, solutions and business cases

  • 13.10 - 13.50Innovation Stage [parallel session]

    Tech Talks

    Moderation: Stefan Ritt
    Lecturer, Technical University of Luebeck & AMUG Dino
    Moderation: Stefan Ritt
    Lecturer, Technical University of Luebeck & AMUG Dino
    13.10 - 13.20
    Metal Binder Jetting for serial production - sinter simulation and distortion compensation
    Lea Reineke
    Project Manager Additive Manufacturing, Fraunhofer IFAM
    13.10 - 13.20
    Metal Binder Jetting for serial production - sinter simulation and distortion compensation
    Lea Reineke
    Project Manager Additive Manufacturing, Fraunhofer IFAM
    13.20 - 13.30
    Post-processing: Why chemical smoothing is the door opener in the medical sector
    Stefan Mannhardt
    Regional Sales Manager Central Europe, DyeMansion GmbH
    13.20 - 13.30
    Post-processing: Why chemical smoothing is the door opener in the medical sector
    Stefan Mannhardt
    Regional Sales Manager Central Europe, DyeMansion GmbH
    13.30 - 13.40
    Getting to the Point: How Point Melt Technology is Taking Electron Beam Melting to the Next Level
    Dr. José Greses
    EMEA Sales Leader, GE Additive
    13.30 - 13.40
    Getting to the Point: How Point Melt Technology is Taking Electron Beam Melting to the Next Level
    Dr. José Greses
    EMEA Sales Leader, GE Additive
    13.40 - 13.50
    Aluminium AM via the disruptive Molten Metal Deposition (MMD) technology
    Dr. Jonas Galle
    CEO, Valcun
    13.40 - 13.50
    Aluminium AM via the disruptive Molten Metal Deposition (MMD) technology
    Dr. Jonas Galle
    CEO, Valcun

AM Tours @ pre-day

Tuesday, March 19, 2024

15.00 - 18.00 CET | Excursions

The tours (bus shuttles) start at main entrance, ECC Berlin. | See here for more information..

  • 15.00 - 15.30

    Registration and meeting point for the tours

    Estrel Congress Center, Sonnenallee 225, 12057 Berlin
    Only included in All Access tickets. Pre-registration is neccessary. Busses leave at 3.30 pm.
    Estrel Congress Center, Sonnenallee 225, 12057 Berlin
    Only included in All Access tickets. Pre-registration is neccessary. Busses leave at 3.30 pm.
  • 15.30 - 18.00

    AM Tour 1: Quantica

    Visit to Quantica – A glimpse into the research and development of high-performance, multi-material additive manufacturing
    Visit to Quantica – A glimpse into the research and development of high-performance, multi-material additive manufacturing
  • 15.30 - 18.00

    AM Tour 2: druckerfachmann

    Visit to druckerfachmann.de – Get a sneak peek inside end-to-end solutions: From the idea to the finished product
    Visit to druckerfachmann.de – Get a sneak peek inside end-to-end solutions: From the idea to the finished product
  • 15.30 - 18.00

    AM Tour 3: Mobility goes Additive

    Visit to Mobility goes Additive e.V. and IAM Hub Berlin
    Visit to Mobility goes Additive e.V. and IAM Hub Berlin
  • 18.00 - 22.00

    Pre-Networking Event @Wasserwerk Berlin

    Exclusive pre-networking event at the extraordinary location Wasserwerk Berlin. Only included in Premium and All Access attendee tickets.
    Exclusive pre-networking event at the extraordinary location Wasserwerk Berlin. Only included in Premium and All Access attendee tickets.

Pre-Networking Event

Tuesday, March 19, 2024

We provide a bus shuttle service, starting at 17.30 at main entrance, ECC Berlin: See here for more information.

  • 18.00 - 22.00

    Pre-Networking Event @Wasserwerk Berlin

    Exclusive pre-networking event at the extraordinary location Wasserwerk Berlin. Only included in Premium and All Access attendee tickets.
    Exclusive pre-networking event at the extraordinary location Wasserwerk Berlin. Only included in Premium and All Access attendee tickets.